Taking the vinyl seat covers off the ford seats

The vinyl seat covers on the ford needed to get removed so Mike, Jarrett, Nicole, Fred, and I (with the help of Mr.G, Roberto, and Javi) took them. The process was a bit tricky if it was your first time, but adapt and overcome, and you'll be fine. So first and foremost, you need to take the seats out. For us, the back seats were already taken out, but the front seats were attached with 12x 1/2" bolts to the underbody. The bolts are covered with plastic covers, and to take them out you need wedge them out using flathead screwdrivers. If you want to, you can either take the seatbelts out by unscrewing the 2x 3/4" screws and pulling them out from the seat. The vinyls are head down by bull rings, which you can take out by using needle-nose pliers. You would wedge the pliers under the bull ring, clamp it, pull and twist and they should come out.